Windows Vista -
How to Update RAID Driver
Published on 12/10/2006
This article describes how to update the RAID driver on a Toshiba Portege M400 mobile PC that is running Windows Vista.

How to Update RAID Driver

1. Obtain an updated RAID driver from the computer manufacturer. For information about how to contact computer hardware manufacturers, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 ( Hardware and software vendor contact information, A-K

60781 ( Hardware and software vendor contact information, L-P

60782 ( Hardware and software vendor contact information, Q-Z

Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information. 
2. Copy the RAID driver to a location on the local computer or to a device that is connected to the local computer. For example, copy the RAID driver to the local hard disk or to a flash memory storage device.
3. Click Start, type device manager in the Start Search box, and then click Device Manager in the Programs list.

 If you are prompted for an administrator password or for a confirmation, type your password, or click Continue. 
4. In the Device Manager dialog box, expand Storage controllers, and then double-click the Toshiba RAID device. 
5. In the Toshiba RAID Properties dialog box, click the Driver tab, and then click Update Driver. 
6. Click Browse, and then locate the folder in which you saved the updated RAID driver.
7. Click OK, and then click Next. Windows Vista updates the RAID driver.
8. After the RAID driver is updated successfully, restart the computer.