您當前的位置：首頁 > 文章中心
Part of the slurry pump parts belong to the vulnerable parts, in the daily use to pay attention to the loss of vulnerable parts of the situation, in time to repair or replace it. In the process of maintenance or replacement of the slag slurry pump, it should ensure the correct assembling and reasonable clearance, and avoid the appearance of the friction phenomenon. Ensure that the pump assembly and piping system is properly installed and firmly and reliably. To ensure the coaxial degree of the motor and pump, to ensure that the elastic pad in the coupling intact and correct, after the damage should be replaced in a timely manner.
Dredging the sand before the boot of the entire mechanical transmission system and machine oil to carry out a comprehensive inspection, and then start to pull the back of the use of the diesel engine, pull the clutch, start the diesel engine, slowly moving loose clutch, the speed to normal. Then the front zipper bucket of the diesel engine.
At the time of operation should often see the various parts screw the tightness and often add lubricating oil to protect, especially the hopper screws and chain, in the water of the four corners and reducer, as well as many of the parts such as the screws must be securely fastened. Underwater Four Corners and other parts, in the use of the need to often add butter, smooth oil, but in the flood season or downtime, the ship should be tied to a strong dock, to prevent the tide will be washed away or caused by the loss of the ship.