您當前的位置：首頁 > 文章中心
Cutter Suction dredger is a kind of ship which is widely used in the dredging project, today's small series with everybody to understand its superiority, hoped to be helpful to you.
To install a rotary reamer device around the suction pipe, the river bottom silt carries on the cutting and stirs, then through the suction mud tube will wring the silt material, through the powerful pump force, transports to the silt material accumulation field, its dredging, the mud, the unloading mud and so on the work process, may one time complete continuously,
It is a high efficiency, low cost of pumping sand, is a good underwater mining machinery. Length is the sum of the lengths of the hull and the length of the hanger. Dredging pump is directly driven by the main machine, Reamer head by the motor or hydraulic mechanism, set the dredging efficiency for the weight of 30%, according to Archimedes ' Law in theory, single-stage dredging pump deep 0M actually not more than 28M, again to absorb deep to add the middle relay pump, relay pump does not need to pressure head high, although the same as the dredging pump, but the power can be greatly reduced, so the relay pump under the general use of high-voltage motor or hydraulic mechanism for power. The A-stage relay pump has no more than 55M suction sand. To deepen the relay pump to increase the pressure of the head, and then the power consumption is also increased.
After descending in the tensile force, digging depth, reamer head diameter, speed. The amount of dredging is generally between $number. The suction tube diameter of the dredging pump and the diameter of the pipe are also provided. This is more complete. Equipped with the hinge suction ship to have a work ship, responsible for anchoring and anchor, in the sale of note spare parts: The work of the ship is provided together. discharge tube how many root. Work anchors should have 4, at least two and anchor floats. The guide pin of the position pile has no.